The Coleman-Mach Lateral Ducted ceiling assembly with manual controls is ideal in applications where there is no 12VDC available, or no ideal locations for a wall thermostat. 

Add On Heat Kit:

For 47000 series use part number 47233-4551

For all but 47000 series use part number 9233A4551

Standard lateral ducted ceiling assembly for use with 24VAC wall thermostat

Recommended Thermostat:

Analog = 7330B3441

Digital = 8330A3241

(Note: The control box with this ceiling assembly supplies 24VAC for the thermostat)

Exclusive DirectFlow Louver System provides cool air where you need it for personalized comfort in any RV!

• Open the specially designed Louvers to channel cool air straight down into the cabin.
• Close the louvers to divert cool air through your existing duct system.
• Exclusive EZReach Filter System provides quick access to the washable air filter.
• Slender profile provides plenty of overhead clearance.

For this application you will also need:

Control kit = 8330-752

Thermostat = 7330G3351

Alternate Digital thermostat = 8330-3362

(Note:  The control box does not provide 12VDC for the thermostat, this will need to be supplied by the application.)

Exclusive DirectFlow Louver System provides cool air where you need it for personalized comfort in any RV!

• Open the specially designed Louvers to channel cool air straight down into the cabin.
• Close the louvers to divert cool air through your existing duct system.
• Exclusive EZReach Filter System provides quick access to the washable air filter.
• Slender profile provides plenty of overhead clearance.

For this application you will also need:

Control kit = 9530A751

Thermostat = 8530A3451

(Note:  The control box does not provide 12VDC for the thermostat, this will need to be supplied by the application.)

Add On Heat Kit:

For 47000 series use part number 47233-4551

For all but 47000 series use part number 9233A4551

Exclusive DirectFlow Louver System provides cool air where you need it for personalized comfort in any RV!

• Open the specially designed Louvers to channel cool air straight down into the cabin.
• Close the louvers to divert cool air through your existing duct system.
• Exclusive EZReach Filter System provides quick access to the washable air filter.
• Slender profile provides plenty of overhead clearance.

Recommended Thermostat:

Non Digital = 7330G3351

Digital = 8330-3362

Standard lateral ducted Heat Pump ceiling assembly for use with 12VDC wall thermostat

Recommended Thermostat:

Digital = 8530A3451

(Note:  The control box does not provide 12VDC for the thermostat, this will need to be supplied by the application.)

Add On Heat Kit:

For 47000 series use part number 47233-4551

For all but 47000 series use part number 9233A4551

Myth:  “You cannot run your Coleman AC with a wall thermostat in a non-ducted application.”

INCORRECT!

For the convenience of a wall thermostat, in a non-ducted application; you only need the 9330F4552 non-ducted ceiling assembly along with the recommended control components for your particular application (listed below)

For this application you will also need:

Control Kit = 9330C755

Thermostat = 8530A3451

(Note:  The control box does not provide 12VDC for the thermostat, this will need to be supplied by the application.)

Add On Heat Kit:

For 47000 series use part number 47233-4551

For all but 47000 series use part number 9233A4551

Myth:  “You cannot run your Coleman AC with a wall thermostat in a non-ducted application.”

INCORRECT!

For the convenience of a wall thermostat, in a non-ducted application; you only need the 9330F4552 non-ducted ceiling assembly along with the recommended control components for your particular application (listed below)

For this application you will also need:

Control Kit = 9530A751

Thermostat = 8530A3451

(Note:  The control box does not provide 12VDC for the thermostat, this will need to be supplied by the application.)

Add On Heat Kit:

For 47000 series use part number 47233-4551

For all but 47000 series use part number 9233A4551

Control knobs mounted on end for best visibility and ease of operation.  Designed with a special contour to fit snugly against convex vehicle ceilings.  Only two inches thick and weighs just over six pounds.  Filter replacement is convenient and easy to perform.

Add On Heat Kit:

For 47000 series use part number 47330-4551 (1050W)

                                     or          47333-4551 (1600W)

For all but 47000 series use part number 9333-4551