Features and Benefits

Models Available for Any Budget or Efficiency Needs
  • AVPA Stanrard Efficiency with EER up to 9.5
  • HVPA High Efficiency with EER up to 11.50
  • Outside Air Options

R-410A Refrigerant

  • Efficient Heat Release
  • Non-Ozone Depleting Refrigerant
  • Synthetic Lubricant
  • Reduced Compressor Wear

High Efficiency and Reliability

  • EER up to 11.50 - No Wall Mount Heat Pump is More Efficient
  • Optional Economizer Reduces Energy Usage
  • High Efficiency Compressor and Lanced Coil Fins
  • High/Low Pressure Switches with Lockout & Short Cycle Protection

Ease of Installation and Service

  • Single Point Power Entry
  • Built-In Mounting Flanges and Internal Disconnect
  • Standard Access Valves and Filters, Status LEDs

Contact Eubank Sales:

Toll Free: 1-888-726-2734

Email: eubankorders@airxcel.com

EAA Wall Mount Heat Pumps


Eubank WalPac HP Heat Pump

The Eubank® EAA family of wall mounted heat pumps are the ideal HVAC system for a wide variety of applications. The exterior mounting means that no valuable interior space is required. EAA heat pumps are packaged units – the refrigerant piping and internal wiring are factory assembled and thoroughly tested. All components are readily accessible for easy service and maintenance. The energy efficient operation keeps operating costs to a minimum and makes the Eubank heat pumps ideal problem solvers for a wide variety of applications, including offices, classrooms and telecommunication shelters.

Eubank EAA Heat Pumps Are Available To Meet Any Budget Or
Efficiency Requirement:

  • EAA High Efficiency Models
    Eubank’s efficient wall mount heat pumps with highly efficient scroll compressors result in Energy Efficiency Ratios (EER’s) of 11.00. Available in cooling capacities of 1½, 2, 2½, 3, 3½ and 4 tons (20,000 to 48,000 BTUH). No other wall mount heat pump is more efficient.
AHRI Certified

Outside Air for Ventilation or Free Cooling
A full range of accessories and options allows Eubank heat pumps to be optimized for each application. Options are available to meet the fresh air requirements of the ASHRAE 62 standard, “Ventilation for Acceptable Indoor Air Quality”. Where cooling is required during cool or cold weather, e.g., telecommunications shelters, a factory installed economizer should be used. To insure proper operation and optimum performance, all outside air ventilation packages are non-removable, factory installed and factory calibrated.

Safety Listed and Energy Certified
All Eubank heat pumps are built to UL standard 1995, 4th edition and CAN/CSA C22.2, No. 236-11. For energy efficiency and performance, the units are tested and rated in accordance to the ANSI/AHRI (Air-Conditioning Heating and Refrigeration Institute) Standard 390 (Single Package Vertical Units). All units meet or exceed the efficiency requirements of ANSI/ASHRAE/IESNA 90.1.2007. Eubank heat pumps are commercial units and are not intended for use in residential applications.

Quiet in the Classroom
In addition to high efficiency, EAA models minimize sound levels in the classroom. A high efficiency axial fan moves air silently through the outdoor coils. A low vibration, scroll compressor ensures quiet operation as well as energy efficiency. The indoor air mover utilizes a revolutionary electronically commutated motor (ECM). This motor consumes a minimum of power with whisper quiet operation. The ECM automatically adjusts its speed to maintain the proper air flow at various external static pressures.

High Efficiency

  • Scroll compressors are standard on all units.
  • Lanced fins and rifled tubing on the indoor & outdoor coils maximize heat transfer.
  • Electronically commutated indoor blower motor on the HVPA high efficiency models and two speed indoor blower motor on the AVPA standard efficiency models.

Engineered Reliability

  • PC board simplifies wiring, consolidates several of the electrical functions in one device.
  • High refrigerant pressure switch with lockout relay protects the compressor in the event of insufficient condenser air flow.
  • Loss of charge pressure switch with lockout relay protects the compressor in the event of a loss of refrigerant or inadequate evaporator air flow.
  • Time delay for short cycle protection.

Ease of Installation

  • Sloped top with flashing eliminates need of rain hood.
  • Built-in mounting flanges facilitate installation and minimize chance of water leaks.
  • Factory installed disconnect on all units, including 460v. models.
  • Outside air hood included with each unit.
  • Single Point Power Entry complies with latest edition of U.L. Standard 1995.

Rugged Construction

  • Baked on beige finish over galvaneel steel on exterior sheet metal.
  • Copper tube, aluminum fin evaporator and condenser coils.
  • Corrosion resistant Dacromet® external fasteners.

Ease of Service

  • LED’s on the control board indicate operational status and fault conditions.
  • Refrigerant access valves are standard.
  • All major components are readily accessible.
  • Front control panel allows easy access and complies with NEC clearance codes on side by side units.
  • Major components accessible from either side.
Eubank V and H Series Wall Mount Air Conditioners and Heat Pumps

Product Literature

Eubank WalPac HP I-O Manual 03309 (Rev.2) (pdf - 2234 KB)
Eubank EAA1020H-1060H Wall-Mount Heat Pump PDS (Rev.4) (pdf - 1578 KB)
Eubank EAA1020H-1060H & EAA2024H-2042H Wall-Mount Heat Pump I&O Manual (Rev.4) (pdf - 2130 KB)
Eubank EHA-EHSA Wall Mount Heat Pump Product Data Sheet (Rev,1) (pdf - 3014 KB)